Danby 5.8 Cu. Ft. Steel Kegerator - Steel  Model:DKC5811BSL


  • Height: 35"
  • Width: 24.25"
  • Depth: 24"
  • Danby 5.8 Cu. Ft. Steel Kegerator - Steel
    Hurry, Sale Ends Sunday!
    List Price: $823.75 $659.00
    As low as $112.03 a month
    See Payment Options
     + FREE Shipping
    Save $164.75 (20%) Today!
    Color: Stainless Steel
    Add to Cart
    Guaranteed Next Day Shipping (details)

    Description & Highlights

    3 Reviews | Write a Review

    Danby 5.8 Cu. Ft. Steel Kegerator - Steel

    Keep your fresh draft beer cold and ready to serve when you use the Danby 5.8 Cu. Ft. Steel Kegerator (DKC5811BSL). This kegerator can hold both full-size (excluding Miller, Coors, and other oversized kegs) and pony kegs with ease, giving you versatility when it comes to the quantity of beer you'd want to serve. This kegerator can convert into a 5.8 cu. ft. all-refrigerator, just in case you wanted to hold beer cans or bottles instead of a keg. The spotless steel door and black tower gives this kegerator a unique design that can fit in with an decor or motif around it.

    Four (4) rolling swivel casters allow you to move this kegerator around the house, so you can be sure to keep the party going into another location if you need to. A drip tray is included to prevent messes and spills from occurring, keeping your floor clean, while the CO2 tank and other hardware is included with the kegerator to make sure that you can set it up straight out of the box. Ideal for any kitchen, game room, garage, or anywhere else, this kegerator can serve you fresh and cold draft beer whenever you need it.

    • Holds Full or Pony Kegs:

      This kegerator can hold standard full-size or pony kegs, allowing you to serve as much beer to you and your friends as you can hold

    • Steel Design:

      A spotless steel design allows this kegerator to blend in to any motif or decor, whether it is in a kitchen, game room, or elsewhere

    • Portability:

      Four (4) built-in swivel casters allow you to roll the kegerator anywhere, keeping the party going no matter the locale

    Specifications & Manuals

    • Model: DKC5811BSL
    • Brand: Danby
    • Holds full or pony sized kegs
    • Does not support the use of oversized rubber ¼ barrel kegs and beveled wall ¼ barrel kegs
    • Converts to 5.8 cu. ft. all-refrigerator
    • Auto defrost
    • Reversible door hinge
    • Black beer tower dispenser
    • Four (4) swivel casters
    • Warranty: 1 year
    • Danby 5.8 Cu. Ft. Steel Kegerator
    • Scratch-resistant top
    • Chrome rail guard
    • Drip tray included
    • Spotless steel door
    • CO2 tank included
    • Input voltage: 120 V/60 Hz
    • Weight: 123.2 lbs
    • Dimensions: 35" H x 24.25" W x 24" D

    Customer Reviews

    Overall Rating: Write a Review
    Danby 5.8 Cu. Ft. Steel Kegerator 4.3 5 2 3
    Danby 5.8 cu ft Kegerator The Danby DKC5811BSL 5.8 cu ft kegerator is a very good unit for the price. Plus it is American made! That is not the case for the majority of inexpensive kegerators out there. That being said, since this is an inexpensive model there is good and bad. First let’s go with the good: A 5lb aluminum CO2 tank, dual gage regulator showing tank pressure and beer line pressure, enough room to hold two 1/6 kegs without a problem, no problems holding temperature of the keg at 36 degrees, externally mounted CO2 tank to extend the refill time of your CO2, includes a good D type coupler to connect the keg, it looks good. Now for the bad: This is a cold plate refrigerator, so the temperature is constantly fluctuating and a circulation fan is needed (I used a 120mm computer fan with 4 screws to hold up off of bottom and an old 6v cell phone charger to power with the line run through the same hole as CO2 line), Some type of tower cooler is needed otherwise your first beer poured will be foam if sitting unused for a while (I used an old 3 inch computer fan I mounted to a box that I laid in the bottom of kegerator with hose going up into tower), beer line is only 5ft long…which is not a problem for most beers but light beers requiring higher pressures (greater than say 12psi) may cause foam because of speed of flow…a longer beer line would solve that, the pressure CO2 line comes with plastic clamps…need to replace with metal to ensure no CO2 leaks, the 17 inch ¼ or ½ oversized coors/miller kegs do not fit (kegerator is only 16¾ inches deep). Besides a couple of these small modifications needed it is a very good kegerator! May 25, 2013
    Good kegerator with its share of faults The kegerator does all that it says it will. It delivered a nice, cold beer. The CO2 level should be lowered below the 10-12 psi recommendation (I use 8) unless you want a thick level of foam. Speaking of which, since it lacks clarification, the CO2 is shipped empty. So although the package comes with everything you need to eventually tap a keg, having just this package and a keg will not give you beer. The instructions for installation leave much to be desired. The "diagrams" used are more like close up action shots that provide little to no value. The instructions are worded poorly and leave ambiguity and the lack of pictures for the contents adds to the level of difficulty. Structurally, the kegerator seems to be fairly fragile. Our kegerator arrived with two noticeable dents in the stainless steel door. The chrome railings on the top are very fragile and bound to the kegerator with just a thin flap that could easily be broken. Additionally, the sheet metal on the side walls is very susceptible to bending, as I found when I propped up a corner to install the wheels. Overall, I would give this kegerator a B-, and that includes buying it on sale. I was expecting something a little more durable and a little less complicated, but with those issues aside, it performs its function well. April 16, 2014
    1-3 of 3

    Learning Center

    Learn More: Learning Center

    You May Also Like